Full coverage of servo hot pressing, universal testing and flame-resistance testing—precision, reliable and traceable materials-testing equipment for new energy, advanced materials and research institutes.
From mechanics to thermal, from flame to film—one device sets the benchmark for each test.
Tension, compression, bending, peel and shear—one machine for many jobs.
QM100 series · 15+ models
Powder hot pressing and multi-layer precision lamination; thickness and density under control.
QM900 series · 13+ models
Charpy and Izod impact for precise material-toughness assessment.
QM750 series · 10+ models
Melt flow, HDT and Vicat softening—full inspection of plastics performance.
QM series · 11+ models
High/low temperature, humidity and salt spray—environmental reliability testing.
QM230 series · 15+ models
Standard specimen preparation with high cutting accuracy for many materials.
QM130 series · 4+ models
Vertical/horizontal burning and glow-wire—flame-resistance evaluation.
QM910 series · 8+ models
Film tensile, puncture and peel—precision testing of ultra-thin materials.
QM100S series · 23+ models
Rubber tensile, resilience and abrasion—full elastomer performance inspection.
QM series · 17+ models
Fabric strength, pilling and color fastness—textile performance testing.
QM series · 6+ modelsQuickly match equipment and standards to your test needs—easy for both engineers
| What You Need to Test | Recommended Equipment | Common Standards |
|---|---|---|
| Tension / Compression / Bending / Shear | Universal Testing Machine (UTM) | ASTM D638, ISO 527 |
| Hot-press forming, separator/electrolyte processes | Hot Press Testing Machines | Internal method |
| Impact toughness (Izod/Charpy) | Impact Testing Machines | ASTM D256, ISO 179 |
| Melt flow, HDT, Vicat | Plastic Testing Machines | ASTM D1238, ISO 306 |
| Separator puncture / film tensile-tear | Film Testing Machines | ASTM D882, GB/T 10004 |
| Flame resistance, oxygen index | Flame Resistance Testers | UL 94, GB/T 2408 |
| Specimen preparation, standard specimens | Sample Cutters | — |
| High/low-temperature environmental performance | Environmental Chambers & Other Equipment | — |
Precision hot pressing in extreme 750°C thermal fields, suited to PEEK/PI high-temperature polymers, carbon-fiber composites and solid-state electrolyte thick films. ±0.5°C temperature uniformity + 30t servo pressure closed-loop ensure process stability and batch consistency.
Core equipment for hot-press forming of solid-state battery electrolyte powder: 100 kN servo pressure + 320°C precision temperature control, 1/20,000 high-resolution acquisition, production-grade thickness/density consistency. Suited to sulfide/oxide solid electrolytes, Li-ion separators and polymer composite films.
Multi-layer precision alignment lamination of electrodes/electrolytes: ±2μm lamination accuracy + ±5μm alignment, up to 20 layers stacked precisely. Suited to solid-state battery stacks, MEA membrane electrodes and multi-layer functional films—key equipment for solid-state battery scale-up.
From universal testers to textile testers, covering the full spectrum of materials testing—every device strictly calibrated
The QM100S is a universal material tester that is most suitable for measuring small-capacity fixation and is optimized for measuring rubber, paper, film and fiber samples. The scalability multi-adapter is suitable for measuring high-precision data of various materials through options for elongation meter, strain gauge, high elongation, and long axis only.
QM100TM is a universal material tester for heavy loads (1000 Kgf) suitable for sample measurement of plastic, rubber, urethane, and composite materials. The design applied with a special monocoque structure improves weight reduction and durability, allowing measurement up to a maximum load of 1,000Kgf even at a maximum interaxial distance of 460mm.
QM100T is a universal material tester that can analyze high-precision physical properties of various materials from 2000Kgf to up to 20000Kgf. As the most suitable equipment for testing plastic composite materials, various strength, elongation, and modulus can be automatically measured by selecting tensile, compression, bending, elongation, and environmental chamber, which are essential items in the engineering plastic field.
The QM100TC is a chamber-type universal material tester for measuring changes in material properties due to cold/heat characteristics by performing tensile, compression, and bending tests under various environmental conditions from cryogenic to high temperature. Liquid nitrogen and refrigerator can be selected depending on the characteristics of the low temperature section, and the wide and abundant internal space and detachable head cover allow quick and convenient replacement of grip and fix test pieces.
QM100SE is a universal UTM device that provides unshakable durability even in high load load measurement based on automatic control and safety through servo motor and software.
The QM100TS is a compact twin columns medium-load compression-only test equipment optimized for compression tests in the heavy load(500Kgf) range and constraints depending on the size of the test piece of the Single Column universal material tester.
QM100FS is an equipment for measuring the durability limit of materials, and it is an equipment for measuring load high-speed cycle tests through pulse control of high-precision servomotors and digital servo controllers.
QM100SS is an ultra-precise micro-load test equipment optimized for measuring micro-loads such as adhesion, probe-tech, release force, softness and cutting strength of food, pharmaceuticals, information and communication materials.
The QM100SH model is an equipment for measuring the adhesive force of tape and adhesives, and is a high-speed peeling test equipment for automatically measuring and analyzing changes in the adhesive force of samples through high-speed peeling.
The QM100SH model is an equipment for measuring the wet tensile strength of tissues and tissue products, and is an equipment for automatically wetting tissues and tissue products immersed in water according to the length of the sample and then measuring the strength through constant speed stretching.
QM100CR is a testing machine for measuring the creep properties of wood-plastic composites. It applies the target load automatically with an electric actuator under ISO 899-2 loading time conditions and records the time and flexural deformation under stress.
QM110TS measures shear strength of hardened specimens bonded with cement-based adhesives, tile adhesives, or wood adhesives on mortar plates or substrates.
It is a high-precision extensometer that minimizes the friction resistance of the grip when measuring the elongation of the test piece by applying an optical isolator-type digital encoder and a high-precision low-resistance special bearing.
Take the adapter to the universal testing machine.Installation of tensile, tear, compression, flexure, peel (90, 180°Peel), hardness (IFD, CFD, ILD) Various tests such as the coefficient of friction (C.O.F), static load, puncture, and durability & figure test are possible.
It is easy to install moving because it has wheels that can be fixed with a U.T.M-only table with a large storage space for storing various test pieces and related equipment necessary for the test.
Core equipment for the hot-press molding of solid-state battery electrolyte powders, featuring 100 kN servo-driven pressure, precise temperature control up to 320°C, and high-resolution data acquisition (1/20,000), achieving mass-production-grade consistency in thickness and density. Compatible with sulfide/oxide solid-state electrolytes, lithium-ion battery separators, and polymer composite membranes.
The QM900A is a hot press device for manufacturing test pieces through high temperature pressure molding such as standard test pieces of plastic raw materials and rubber products, test pieces for foreign matter inspection, and color test pieces.
Precision alignment and lamination of multi-layer electrode/electrolyte stacks, featuring ±2 μm lamination accuracy and ±5 μm alignment accuracy, capable of precisely stacking up to 20 layers. Suitable for solid-state battery stacking, membrane electrode assemblies (MEAs), and multi-layer functional films, it is a key piece of equipment for the large-scale production of separators.
The QM940AT is a small non-pressure precision molding plate and is a small hot press equipment with excellent uniform temperature, pressure maintenance, and plate horizontality.
Precision hot pressing in an extreme thermal environment of 750°C, compatible with high-temperature polymers (PEEK/PI), carbon fiber composites, and solid-state electrolyte thick films. Features ±0.5°C temperature uniformity and a 30-ton closed-loop servo pressure system to ensure process stability and batch-to-batch consistency.
QM900MA is a semi-auto hot press for automatically press-molding a test piece by setting the mounting pressure, temperature, and holding time of a hydraulic automatic pressurization system and a high-power cylinder.
QM900L is a hot press device for forming test pieces of plastic raw materials and rubber materials, inspecting foreign substances, and manufacturing color test pieces. It is an equipment for manufacturing test pieces by forming injection molding conditions of materials using two heating plates and high-pressure cylinders.
QM900M is a hot press device for forming test pieces of plastic raw materials and rubber materials, inspecting foreign substances, and manufacturing color test pieces. It is an equipment for manufacturing test pieces by forming injection molding conditions of materials using two heating plates and high-pressure cylinders.
QM900S is a hot press device for forming test pieces of plastic raw materials and rubber materials, inspecting foreign substances, and manufacturing color test pieces. It is an equipment for manufacturing test pieces by forming injection molding conditions of materials using two heating pltes and high-pressure cylinders.
It is easier to supply and maintain pressure than a conventional hand pump for mini hot press, and has the advantage of not having to pump several times by hand. It is possible to adjust the pressurization speed by installing an air regulator, and it is easy to maintain the pressure with a simple fixing pin accessory.
It is a safety cover dedicated to mini hot presses that facilitates movement installation and ensures visibility during testing, helping workers maintain safety.
It is a table dedicated to mini hot press that can be customized according to user convenience.
The QM750A is an impact tester that can be used by adjusting the Izod and Charpy impact acceleration (Accuracy ±0.02%) according to ASTM and ISO test method, and can automatically measure the entire test process such as Auto Rising and Auto Braking system.
The QM750B is the first adhesive shear impact strength tester in Korea to measure the impact strength of adhesive shear such as epoxy and sol in accordance with ASTM D 950.
The QM700A is a dual digital impact tester that can measure the impact strength according to the test method with one equipment by exchanging the Izod and Charpy tool.
QM700L is an apparatus for analyzing the low temperature characteristics on the toughness and brittleness of the material, and is an impact test apparatus for measuring the impact test in the environmental chamber of the temperature range of -45-150℃.
The QM700C is a large-capacity charpi impact tester made of carbon fiber, aramid composite material, FRP, aluminum, and metal, and is an fully automatic charpi impact tester with Auto Rising and Auto Braking system.
The QM720FD is an impact test device for measuring impact resistance and toughness of plastic films according to ASTM D1709 and ISO 7765 standard free-fall dart methods A and B, enabling additional differential sets and dart fabrication according to standards or internal customized requirements.
The QM720FB is an impact test device to measure the breaking and limit resistance of a material due to a drop impact of a component material or a finished product and to measure the breakage or breakage of the material due to energy impact by dropping balls, pins, etc. at a certain height.
This product is intended to measure and evaluate the condition and the durability of the test specimen or the product after a drop impact by dropping them at a set height.
This product is intended to test and evaluate the intactness and the degree of impact the box can withstand by dropping them at a set height. It also features a digital distance sensor rotational angle modifiable gripper to measure the vertical and deflection drop impact of the package boxes.
QM700D is Dupont impact tester a painted film, plastic plate, plastics sheet, or other test piece between a spherical punch having a tip with a specified radius and a stand having a concave with the same dimensions as the tip of the punch, drops a weight onto the punch from a specified height, thus making it collide, be observed visually the conditions of the test piece and how much it is destroyed, and evaluates the impact resistance.
This product measures the temperature of heating deformation which is one of the methods of measuring polymer materials’ thermal properties. It allows to perform Edgewise and Flatwise test in accordance with ASTM D648 and ISO 75 standard.
This product evaluates the fluidity index by measuring the mass of the test specimen extruded though the die for 10minutes with certain temperature and load in accordance with materials. It has automatic cutting and mass calculation function with retrieving test method allows to prevent any error and measure uniform and precise data.
This product measure high temperature and pressure heat resistance and aging of automobile parts by depositing test specimen in calcium chloride, antifreeze, oil, etc. in accordance to MS (Hyundai Motor) Test Method.
The QM700NA is an automatic notch machine for machining notch grooves in plastic impact test pieces and provides a clean surface with original notch blades (45±0.50 and 0.25R±0.05mm/hardmetal/Japan) and uniform groove depth and notch shape machining.
The QM700N is a manual notch machine equipped with an original notch blade (45±0.5 and 0.25R±0.05mm/hardmetal/Japan), and is an economical device that can adjust the cutting speed in four stages.
This product measures wear index of various materials (Plastic, rubber, fiber, constructional flooring, wood and printed). It uses standard abrasive wheel to wear the material then the result compares between initial and the final mass.
The QTR1000C is a Rockwell hardness meter for measuring the hardness of metal and plastic materials and measures hardness according to the depth at which the surface of the material automatically presses into the initial stabilization section.
This product sterilizes and disinfect the pathological equipment or culture the media for medical/food purpose by depositing a sample in highly pressurized and temperature condition in certain period of time.
QM1201 is a polymer mixer for manufacturing extrusion and molding test pieces of various materials, and is an apparatus for manufacturing a test piece of a certain shape by heating, melting, and injecting plastic and rubber materials into a necessary frame or mold.
The MD-300S is an electronic hydrometer that measures the specific gravity of various materials and consists of an integrated specific gravity kit, a windproof film, and a safety cover.
It is necessary to measure the wear condition and wear degree of the material through weight change, thickness, and reduction in gloss of the sample by rotating and wearing with a constant load on the tester with the specified abrasive stone of Taber.
This product is to evaluate reliability of environment test of various materials (Electronic, automotive parts, food/medicine, etc.) by programming high/low temperature and humidity conditions.
This product consists of 3-channels of test specimen mounted with servo motors to measures fatigue limit of constructional, bridge, and waterproof coating asphalt materials. Adjustable highly precise servo motor makes no distance error under continuous fatigue load and allows to control speed, distance, number of fatigues limit and auto-save test method.
QM230 is a heating oven for drying products and removing moisture from plastic raw materials, and is a dryer that implements uniform and stable temperature distribution in a chamber with a digital PID controller and a hot air circulation forced convection system.
The QM400 is an environmental chamber for measuring brittleness changes caused by leaving a test piece at a low temperature for a certain period of time and measuring brittleness changes such as tension, bending, and impact.
This product measures and analyze changes in deformation, cracks and durability caused by thermal shock. By applying rapid temperature change over short period of time to observe changes in properties.
This product measures the hear resistance and modulus of elasticity of rubber and plastic materials by digital displacement sensor which automatically records the change in the elongation of the sample due to stress in high temperature.
This product measures an electrical property and change in volume resistance of carbon, compound material used in wires. It automatically measures and analyze changes in current and resistance when thermal expansion and contraction of polymer occurs due to temperature.
The QM200C is a composite environmental tester for measuring heat-resistant aging and heat-resistant cycle testing of products implemented under the same conditions as the actual environmental conditions in which a vehicle is used to measure the durability and heat-resistant deformation of materials and components used in interior and exterior materials.
This product equipped with built-in circulation pump and higly precise PID controller to maintain uniform and stable temperature with high durability stainless steel body. Custom-interior option is available in accordance to size of the test specimen.
This product is a closed aseptic workstation that prevent contamination of examiner while handling with various harmful bacteria, pathogen or gases generated by materials. High purity HEFA filters and internal circulation independent fans allows to maintain 99.97% stability and provide sterilized workstation.
The QM170 is a device for measuring the perforation strength of corrugated paper and measures the strength of the recorded test piece by dropping a predetermined hammer at a certain angle and passing through the test piece.
It is an analysis scale for mixing parts and materials and raw materials, and it is a high-precision scale that can measure and analyze the capacity according to the purpose of use up to a minimum scale of 0.0001g (Option).
The MD-300S is an electronic hydrometer that measures the specific gravity of various materials and consists of an integrated specific gravity kit, a windproof film, and a safety cover.
MB95 is a water content measuring device for measuring moisture content of plastic raw materials or various materials, and is an apparatus for automatically measuring moisture content by evaporating moisture from materials using halogen heaters.
It is possible to prevent vibration of the test equipment and maintain the safety of the equipment by installing the lower steel frame and the upper artificial marble as a laboratory-only table.
QM130PA is a sample cutter for manufacturing standard test pieces in accordance with international standards such as ASTM, ISO, KS, JIS, and DIN, and is an equipment for molding test pieces of various materials by exchanging standard blades.
The QM130A is a sample cutting device for manufacturing standard test pieces in accordance with international standards such as ASTM, ISO, KS, JIS, and DIN, and for molding and cutting test pieces of various materials by exchanging standard blades.
The QM130N is a sample cutting device for manufacturing a standard test piece and is a device that manually presses and cuts various materials into a standard shape by exchanging and installing tensile and tear cutters according to the standard standard.
The QM500H is a horizontal flame retardant tester for evaluating the flame retardancy of automobiles, aircraft, railways, and vehicle interior materials, which is used to measure the flame retardancy of the material according to the combustion length and combustion time by using a Bunsen burner.
QM500V is a flame-retardant tester that is convenient to maintain the combustion distance between flame and material by applying a 9.5mm Bunsen burner (USA) and an automatic vertical transfer system as cited flame-retardant test equipment based on UL 94.
Vertical, horizontal, 45° and 60° tests can be performed in parallel with equipment for flame retardancy testing of fixed-wing propeller-driven aircraft, fixed-wing turbo jet aircraft, turbofan aircraft, prop-pan aircraft and helicopters.
QM500D is a flame-retardant test device according to the flame-retardant performance test method of the Korea Fire Industry Institute. It is a device to evaluate/analyze flame-retardant by measuring combustion time and combustion distance carbonization area by burning the test piece with a 45° method.
The QM500D (ISO 15025) model is a flame-retardant test device that measures flame diffusion characteristics when applying small flames to flexible materials placed vertically in the form of single-layer or multi-layer fabric (coating, quilt, multilayer, sandwich composition).
The QM500HWF is a flame retardant test device for measuring flame retardancy of TPU, Styrofoam, insulation, and foamed plastic products, consisting of the original wingtip Bunsen burner (USA), the burner's angle adjustment head, and a sealed hood.
The QM500U is a flame retardant testing device for evaluating combustibility of electrical, electronic products, and automotive aircraft parts, and can measure UL-94: V-o, 5V, HB, HBF, and VTM test evaluation by selecting the Original Bunsen Burner and angle-adjusted test tool according to UL-94 standard testing methods.
The QM500HF is a flame-retardant test equipment with excellent safety and convenience as it can measure combustion time on the external control panel while the door is sealed and secured.
This product measures the heat-sealing state and optimal sealing condition of film to find optimize molding condition by adjusting the temperature inclination, pressure and time of 5 heating plates. Specialized heat-resistant steel plate and independent horizontal control system possible to maintain uniform pressure dispersion and horizontality even in continuous use. Detachable head adapter prevents twisting and eccentricity when exchanging heating blocks.
This product measures static and dynamic friction of the materials (film, paper and plastic). It automatically measures the initial and kinetic friction force generated by pulling the sled with specified load on the surface of the materials.
This product measures the coefficient of inclined friction of various materials (Film, plastic, tile, shoes and flooring) based on ASTM D 4918, D 20. It measures the change in the angle inclination by automatic detection of slip of the materials.
This product automatically measures the coefficient of sensing friction when the material slides down by raising the angle inclination at specific speed. Lightweight and small size allows portable and easy installation which can measure uniform and stable angle inclination with a micro motor.
This product evaluates the seal-ability and its condition according to the shape of the product by heat sealing process. Exchangeable customized product design and heating molds available to program heating pressure and molding condition.
The QM2000A model is a holding force test device for measuring the distance pushed or the time when the adhesive test piece fell by applying a prescribed load after pressing the specimen with a certain area on the SUS plate with a holding force test device for each channel.
QM2000AC is a chamber-type retention test device for measuring adhesion retention of adhesives, stickers, labels, tapes, etc. and automatically measures adhesion durability according to heat resistance and humidity under temperature and humidity conditions.
The QM2000AH is a device for measuring the holding power of tapes and adhesives, and is a high-temperature holding force tester for automatically measuring heat resistance changes in adhesive force in a high-temperature environment.
This product measures and analyzes the material’s (water/fire/heat-proof film) breakage and peeling of fibers by repeatedly creasing and twisting at regulated speed and distance.
This product is to measure the hardness of a painted or coated surfaces by repeating scratch test with standard pencil that has certain load in at 45˚ and 90˚.
The QM680D is designed to measure scratch and abrasion resistance of electric vehicle and automotive electronic displays. It supports testing based on Hyundai and Kia MS test standards.
QM680L is an abrasion test device to evaluate the wear resistance of surfaces where direct contact and exposure occur, such as electronics, films, automobile interior materials, door panels, mobile phones, and medical devices, by repeating continuous friction and wear on the surface at a constant load and speed.
QM680R is an abrasion test device to measure the abrasion resistance of coatings such as household appliances, printing stickers, box surfaces, and electronics surfaces. It is a device to evaluate the abrasion resistance of coatings by rubbing/wearing the surface with constant load.
The QM680I is an abrasion test device to measure the durability of ink by measuring the change in color smudging and erasing of ink through surface abrasion of printed products.
This product equipped with a powerful BLDC motor to measure simplified test of adhesion, tensile, and removal force, and repetitive test using a push-pull gauge which provides uniform speed and high accuracy even with the heavy load.
This product measures peel strength and adhesive force by adhering a tape or sheet on the SUS plate with constant load and prescribed speed by highly precise BLDC motor and the digital control system.
This Product is to measure airtightness and rupture pressure of any sealing packages to ensure the preservation and protection ability to maintain the freshness of the products with the automatic measuring digital pressure sensor.
The QM2000 is an adhesive tape and adhesive sheet retention test device for measuring the distance pushed or the time when the adhesive test piece fell off by applying a prescribed load after compressing the specimen adhered to the prescribed SUS plate.
The QM2000H is a standard rubber roller for pressing films, tapes, interior sheets, etc. to a prescribed area, and is a manual rubber roller for producing a standard test piece by bonding the adhesive force standard test piece to a prescribed load.
Measures initial adhesive force by record down the size and assist distance of the largest high-density ball when it slopes down.
This product equipped with various bar coaters and applicators to perform constant thickness of paint coating on the test-specimen.
The QM307-3 is an internal strength test device for measuring internal strength of plastic sheets, films, papers, wires, etc., and can freely adjust the pressure load and bending angle of the replaceable grip and servo motor depending on the mounting material, and measure the folding durability of the material through cycle test and bending speed test.
The QM543 is a device for measuring the thickness of various test pieces, such as films, plastic sheets, rubber and paper, and can measure the thickness of the material with ±0.001mm (QM543) precision without shaking or operator error.
The QM600 is a repeat compression test device for evaluating the resilience and durability of soft urethane foam, such as car seats, chairs, memory foam, and bed mattresses, and measures the deformation and restoration of materials by repeatedly compressing the specified size (100,000 times).
This product is to manufacture the test specimen using synthetic resin, rubber and raw materials. Equipped with high power servo motors and direct helical gears which allows easy and convenient operation, detachable blade can be clean easily and prevent from contamination and the plastic stirring blade and torque sensor can be install optionally to measure change in thermal characteristic and intrinsic viscosity of polymer which could have speed up to 150rpm and sample mold of 150cc with torque 500N•m.
This product evaluates the crack growth by bending the materials (synthetic leather, vulcanized rubber and automobile usage rubber) repeatedly. Throughout the repeated bending test with punching a whole on the test specimen, it allows to measure the crack length and counter at uniform speed.
This product is substituted oven in accordance with ISO 188 standard to maintain regular gas emission and wind speed to prevent deformation and abnormal degradation due to gas generated by organic compounds during aging process.
QDR-2020 is an equipment (leometh) that measures the workability and vulcanization properties of rubber actually required in the field production line based on the vulcanization test method of KS M 6687 rubber mix.
QMV-2020 is an equipment (pattern viscometer) for identifying viscosity characteristics for unvulcanized polymers or raw materials required at the production site based on KSM 6605 unvulcanized rubber physics test method.
The QM300 is a two-roll mill for mixing rubber, silicon, plastic raw materials and various functional additives, and is a mixing roll equipment that can be molded with a high-power motor and a heating system.
This product is forced circulation with horizontal moving convection equipped oven to measure changes in materials (Plastic, Rubber, composite materials) due to heat resistant aging and continuation of heat exposure.
This product measures compression rate of rubber and urethane by compressing the test specimen with certain thickness and left at certain temperature and period. Difference in thickness between initial and after the recovery of the test specimen is calculated in percentage to find compression rate.
When plastic and rubber products are cooled to a low temperature, they are broken or destroyed due to plastic deformation occurring in the material. This is called brittleness or brittleness test equipment to measure the drop temperature (brittleness) at which 50% of the test piece is destroyed to measure the physical limit of brittleness.
This product measures the wear of materials (rubber, tire, urethan foam, etc.) with the standard abrasive cloth attached to the drum at the speed of 40rpm/min. Wear index is being calculated by comparing the difference at wear mass and length between the DIN standard test specimen.
This product measures the wear of the materials (tires, rubber, urethane foam, automobile parts, etc.,) with NBS standard test specimen and normal test specimen. Under same condition, the loss amount and wear index is calculated by comparing mass and thickness change between 2 specimens.
The QM600A is an apparatus for measuring and comparing the mass of a pre-test material and the mass reduction after the test by wearing standard abrasive stones and test pieces 500 times at a prescribed speed to measure the wear of plastic, rubber or automotive parts materials.
This product measures the resistance to cracking and cutting or growth of shoes or industrial polyurethane materials by repeated bending test. Length of the perforated test specimen for certain period or the number of bending measure when it reaches cutting at 6mm.
This product measures the restoration rate and elasticity changes of Urethan foam, sheet, and mattress by applying actual user’s weight and environment condition in certain period.
GS-615 is an air damper type load control system that can measure data uniformly and stably by applying a multi-adapter system according to the type of hardness meter to prevent measurement errors by workers.
GS series is a rubber hardness meter that measures the size of hardness depending on the depth of penetration into the material using the needle of each material shape by applying a prescribed load to measure the hardness of rubber, plastic, and sponge.
QM600H is a GAKUSHIN-type wear test device for measuring dyeing and discoloration smudging of car interior materials, interior films, sofas, and leather materials. It is a device to compare and evaluate the contamination of the surface of the material by continuously rubbing the surface of the white cloth under dry and wet conditions.
The QM680 is a device for evaluating friction reliability by measuring the degree of contamination and color smudging on white cotton by rubbing the surface of fiber, leather, rubber, and film plastic products.
QMP60 is a standard light source for determining the color and color temperature of fiber, paper paint, paint prints, and plastic test pieces, and standard light source lamps such as D65, A, CWF, U30, and UV can be used individually.
QM137 is a tear strength test device (Elmendorf) for measuring tear strength of paper, cardboard, fabric, leather, etc. and measures the tear strength of lost energy as soon as the test piece is torn at a certain angle.
The QM650B is a device for testing cracks and tears against repeated bends of synthetic leather or shoe materials, and measures the crack resistance of the material by repeatedly bending 22.5˚.
The QM550A is a rupture strength tester for measuring tear strength of paper, film, fiber, plastic sheet, etc., and measures the maximum pressure of tearing material by expanding the injected rubber film with glycerin oil at a constant speed.
10 categories, 200+ models; engineers help with selection, 48-hour response, global synchronized delivery.